Shopping cart

  • Follow Us
0
All Categories
MTS

Sort by

View
COLLET HOLDER MORSE TAPER MT4-ER32-2.76″

COLLET HOLDER MORSE TAPER MT4-ER32-2.76″

$69.00

COLLET HOLDER MORSE TAPER MT4-ER32-2.76″

$69.00
Made of Special Alloy Steel Surface hardened to 62 HRC Draw bar : 5/8 Collet Nut included Taper to Taper…
COLLET HOLDER MORSE TAPER MT4-ER40-2.76″

COLLET HOLDER MORSE TAPER MT4-ER40-2.76″

$87.00

COLLET HOLDER MORSE TAPER MT4-ER40-2.76″

$87.00
Made of Special Alloy Steel Surface hardened to 62 HRC Draw bar :  5/8-11 Collet Nut included Taper to Taper…
COLLET HOLDER R8-ER40-2.76″

COLLET HOLDER R8-ER40-2.76″

$70.00

COLLET HOLDER R8-ER40-2.76″

$70.00
Made of Special Alloy Steel Surface hardened to 62 HRC Taper to shank runout <0.0002" Wrench not included ER40 Collet…
COLLET R8 SET IMPERIAL ,13PCS

COLLET R8 SET IMPERIAL ,13PCS

$152.60

COLLET R8 SET IMPERIAL ,13PCS

$152.60
Including 1/8" , 3/16" ,1/4" , 5/16" , 3/8" ,7/16" ,1/2" , 9/16" , 5/8", 11/16" , 3/4" ,13/16" ,…
END MILL HOLDER BT40-E1″-3.94″

END MILL HOLDER BT40-E1″-3.94″

$78.00

END MILL HOLDER BT40-E1″-3.94″

$78.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER BT40-E1/2″-2.5″

END MILL HOLDER BT40-E1/2″-2.5″

$67.00

END MILL HOLDER BT40-E1/2″-2.5″

$67.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER BT40-E1/4″-2.48″

END MILL HOLDER BT40-E1/4″-2.48″

$67.00

END MILL HOLDER BT40-E1/4″-2.48″

$67.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER BT40-E3/16″-2.48″

END MILL HOLDER BT40-E3/16″-2.48″

$67.00

END MILL HOLDER BT40-E3/16″-2.48″

$67.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER BT40-E3/4″-2.48″

END MILL HOLDER BT40-E3/4″-2.48″

$69.00

END MILL HOLDER BT40-E3/4″-2.48″

$69.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER BT40-E3/8″-2.48″

END MILL HOLDER BT40-E3/8″-2.48″

$67.00

END MILL HOLDER BT40-E3/8″-2.48″

$67.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER BT40-E5/16″-2.48″

END MILL HOLDER BT40-E5/16″-2.48″

$67.00

END MILL HOLDER BT40-E5/16″-2.48″

$67.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER BT40-E5/8″-2.48″

END MILL HOLDER BT40-E5/8″-2.48″

$69.00

END MILL HOLDER BT40-E5/8″-2.48″

$69.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER BT40-E7/8″-3.54″

END MILL HOLDER BT40-E7/8″-3.54″

$76.00

END MILL HOLDER BT40-E7/8″-3.54″

$76.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER CAT40-E1-1/4″-4.12″

END MILL HOLDER CAT40-E1-1/4″-4.12″

$89.00

END MILL HOLDER CAT40-E1-1/4″-4.12″

$89.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER CAT40-E1″-4″

END MILL HOLDER CAT40-E1″-4″

$73.00

END MILL HOLDER CAT40-E1″-4″

$73.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER CAT40-E1/2″-2.5″

END MILL HOLDER CAT40-E1/2″-2.5″

$69.00

END MILL HOLDER CAT40-E1/2″-2.5″

$69.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…