CAT40 ER32 COLLET CHUCK SET(20pcs)
CAT40-ER32-2.76″ in set including 20pcs of Collets and a Wrench in a plastic box.
Holder made of Special Alloy Steel
Surface of holder hardened to 62 HRC
Can be used on all CAT40 machines
All critical surfaces are ground.
Dynamically balanced to G2.5 at 20,000RPM
Taper to Taper runout <0.0002″
Pull Stud thread 5/8″-11
ER32 capacity: 5/32 – 3/4″
Holder balanced G2.5 at 20,000RPM
Taper to Taper accuracy of holder =0.0002″
Draw bar 5/8″-11
Collets collapse by 0.040″