Specially designed for Stub length ER32 Holders Overall Length : 10" Brand : NOBL
ER32 Wrench for Stub Short Length Holder
- Specially designed for Stub length ER32 Holders
- Overall Length : 10″
- Brand : NOBL
$38.00
6 in stock
ER40 collet, Hole Size 7/16 inch Tool holding range 0.438" to 0.398" Made of high alloy spring steel Hardened surface…
ER40 COLLET 7/16 inch hole size
- ER40 collet, Hole Size 7/16 inch
- Tool holding range 0.438″ to 0.398″
- Made of high alloy spring steel
- Hardened surface to 44-48 HRc
- Maximum gripping force with 16 jaws
- Runout precision of 0.0006″ (Concentricity of .0003″)
$18.00
7 in stock
Can be mounted on Milling Machine Table Fit on Lathe using a Back Plate Diameter of base plate : 3.94"(100mm)…
ER40 Collet Chuck 100mm Base-plate
- Can be mounted on Milling Machine Table
- Fit on Lathe using a Back Plate
- Diameter of base plate : 3.94″(100mm)
- ER40 holding capacity range : 1/8-1″( 3-26mm)
$149.20
Out of stock
Diameter: 63mm (2.5") Length: 25.5mm (1") Thread: M50x1.5mm Order related Spanner : 3006-0110
ER40 COLLET NUT
- Diameter: 63mm (2.5″)
- Length: 25.5mm (1″)
- Thread: M50x1.5mm
- Order related Spanner : 3006-0110
$20.00
45 in stock
9 pieces of ER11 with hole Sizes : 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5mm Made of high…
ER8 Collet SET METRIC, 9 Pieces
- 9 pieces of ER11 with hole Sizes : 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5mm
- Made of high alloy spring steel.
- Hardened surface to 44-48 HRc
- Maximum gripping force with 16 jaws
- Runout precision of 10µm (Concentricity of 5µm)
- Available both in imperial and metric sizes
$239.00
1 in stock
Diameter : 12mm Thread : M10x0.75mm Length : 10.8mm Order related Spanner : 3006-0010
ER8 MINI COLLET NUT
- Diameter : 12mm
- Thread : M10x0.75mm
- Length : 10.8mm
- Order related Spanner : 3006-0010
$26.00
51 in stock
Made of Special Steel 58-62 HRC Balanced G2.5 at 20,000RPM Gauge length : 4"
HSK 100 A ER16 COLLET HOLDER 4″
- Made of Special Steel 58-62 HRC
- Balanced G2.5 at 20,000RPM
- Gauge length : 4″
$276.00
2 in stock
Made of Special Steel 58-62 HRC Balanced G2.5 at 20,000RPM Gauge length : 4"
HSK 100A ER32 COLLET HOLDER 4″
- Made of Special Steel 58-62 HRC
- Balanced G2.5 at 20,000RPM
- Gauge length : 4″
$290.00
2 in stock
Taper : HSK63A Type : Shell Mill Holder / Face Mill Arbor Arbor Size : 1" Gage Lengths : 2.76"…
HSK63A 1″ 2.76″ Shell Mill Holder
- Taper : HSK63A
- Type : Shell Mill Holder / Face Mill Arbor
- Arbor Size : 1″
- Gage Lengths : 2.76″
- Clamping System: Drive keys and cap screw for secure cutter mounting
- Material: High-grade alloy steel, hardened & precision ground
- Runout Accuracy : les than 0.0001″
- Balance Grade: G2.5 @ 25,000 RPM (suitable for high-speed cutting)
- Coolant Capability: Through-spindle coolant compatible
- Finish : Precision ground with anti-corrosion treatment
- Brand : NOBL Tooling
$148.50
10 in stock
Taper : HSK63A Type : Shell Mill Holder / Face Mill Arbor Arbor Size : 1" Gage Lengths : 4"…
HSK63A 1″ 4″ Shell Mill Holder
- Taper : HSK63A
- Type : Shell Mill Holder / Face Mill Arbor
- Arbor Size : 1″
- Gage Lengths : 4″
- Clamping System: Drive keys and cap screw for secure cutter mounting
- Material: High-grade alloy steel, hardened & precision ground
- Runout Accuracy : les than 0.0001″
- Balance Grade: G2.5 @ 25,000 RPM (suitable for high-speed cutting)
- Coolant Capability: Through-spindle coolant compatible
- Finish : Precision ground with anti-corrosion treatment
- Brand : NOBL Tooling
$161.80
9 in stock
Taper : HSK63A Type : Shell Mill Holder / Face Mill Arbor Arbor Size : Ø3/4 Gage Lengths : 2.76"…
HSK63A 3/4 2.76″ Shell Mill Holder
- Taper : HSK63A
- Type : Shell Mill Holder / Face Mill Arbor
- Arbor Size : Ø3/4
- Gage Lengths : 2.76″
- Clamping System: Drive keys and cap screw for secure cutter mounting
- Material: High-grade alloy steel, hardened & precision ground
- Runout Accuracy : les than 0.0001″
- Balance Grade: G2.5 @ 25,000 RPM (suitable for high-speed cutting)
- Coolant Capability: Through-spindle coolant compatible
- Finish : Precision ground with anti-corrosion treatment
- Brand : NOBL Tooling
$124.00
10 in stock
Taper : HSK63A Type : Shell Mill Holder / Face Mill Arbor Arbor Size : Ø3/4 Gage Lengths : 4"…
HSK63A 3/4 4″ Shell Mill Holder
- Taper : HSK63A
- Type : Shell Mill Holder / Face Mill Arbor
- Arbor Size : Ø3/4
- Gage Lengths : 4″
- Clamping System: Drive keys and cap screw for secure cutter mounting
- Material: High-grade alloy steel, hardened & precision ground
- Runout Accuracy : les than 0.0001″
- Balance Grade: G2.5 @ 25,000 RPM (suitable for high-speed cutting)
- Coolant Capability: Through-spindle coolant compatible
- Finish : Precision ground with anti-corrosion treatment
- Brand : NOBL Tooling
$159.00
9 in stock
Taper: HSK63A (taper & face contact by design) Collet Type: ER16 (accepts 1/16-3/8 /1 mm–10 mm ) Gage Length: 4″…
HSK63A ER16 4″ Collet Chuck Holder
- Taper: HSK63A (taper & face contact by design)
- Collet Type: ER16 (accepts 1/16-3/8 /1 mm–10 mm )
- Gage Length: 4″ (152 mm) from gauge line to collet nut face
- Material: High-grade alloy steel, heat-treated & precision ground
- Runout Accuracy : ≤ 0.0002″
- Balance Grade : G2.5 @ 25,000 RPM – suitable for high-speed machining
- Coolant Capability : Through-spindle coolant
- Nut Type : Standard ER16 collet nut included
- Finish : Precision ground with anti-corrosion coating
- Brand : NOBL Tooling
$135.00
14 in stock
Taper: HSK63A (taper & face contact by design) Collet Type: ER16 (accepts 1/16-3/8 /1 mm–10 mm ) Gage Length: 6"…
HSK63A ER16 6″ Collet Chuck Holder
- Taper: HSK63A (taper & face contact by design)
- Collet Type: ER16 (accepts 1/16-3/8 /1 mm–10 mm )
- Gage Length: 6″ (152 mm) from gauge line to collet nut face
- Material: High-grade alloy steel, heat-treated & precision ground
- Runout Accuracy : ≤ 0.0002″
- Balance Grade : G2.5 @ 25,000 RPM – suitable for high-speed machining
- Coolant Capability : Through-spindle coolant
- Nut Type : Standard ER16 collet nut included
- Finish : Precision ground with anti-corrosion coating
- Brand : NOBL Tooling
$137.45
10 in stock
Taper: HSK63A Collet Type: ER20 (accepts 1/16-1/2 /1 mm–13 mm ) Gage Length: 4″ (152 mm) from gauge line to…
HSK63A ER20 4″ Collet Chuck Holder
- Taper: HSK63A
- Collet Type: ER20 (accepts 1/16-1/2 /1 mm–13 mm )
- Gage Length: 4″ (152 mm) from gauge line to collet nut face
- Material: High-grade alloy steel, heat-treated & precision ground
- Runout Accuracy : ≤ 0.0002″
- Balance Grade : G2.5 @ 25,000 RPM – suitable for high-speed machining
- Coolant Capability : Through-spindle coolant
- Nut Type : Standard ER16 collet nut included
- Finish : Precision ground with anti-corrosion coating
- Brand : NOBL Tooling
$124.90
11 in stock
Taper: HSK63A (taper & face contact by design) Collet Type: ER16 (accepts 1/16-1/2 /1 mm–13 mm ) Gage Length: 6"…
HSK63A ER20 6″ Collet Chuck Holder
- Taper: HSK63A (taper & face contact by design)
- Collet Type: ER16 (accepts 1/16-1/2 /1 mm–13 mm )
- Gage Length: 6″ (152 mm) from gauge line to collet nut face
- Material: High-grade alloy steel, heat-treated & precision ground
- Runout Accuracy : ≤ 0.0002″
- Balance Grade : G2.5 @ 25,000 RPM – suitable for high-speed machining
- Coolant Capability : Through-spindle coolant
- Nut Type : Standard ER16 collet nut included
- Finish : Precision ground with anti-corrosion coating
- Brand : NOBL Tooling
$137.45
10 in stock
