PVD Coated ,Suitable for stainless steel finishing with low feed and small
depth of cut. High positive rake angle. To make sure much
better surface quality and longer tool life.

• Uncoated.
• First choice for Aluminum, non-ferrous, Titanium alloys and HRSA
• Ideal for stable machining
• for medium to high speed and feed
• Corner radius : 0.015″
• MS cheap-breaker for medium to finishing
• IC of Insert: 1/2″

• ISO designation : CNMG 120404
• TiCN and Al2O3 CVD
• Material to cut : Steel and general purpose
• Ideal for stable to interrupted machining
• Inscribed circle diameter : 1/2
• Corner radius : 0.016″
• Number of edges : 4
• Clearance angle : 0
• Hole diameter : 0.2031″
• Cheap breaker : OPM
• Grade : OC2125

First choice for Steel, medium machining. Extensive machining
feed and depth of cut. Designed
positive rake angle provides
lower cutting force and smooth
cutting. Very stable tool life.
Medium hardness and medium
roughness substrate with CVD
coating. Thick Al2O3 layer
provides excellent wear
resistance and chipping
resistance for general machining.

• AlTiN PVD coated
• Suitable for stainless steel and supper alloys
• Ideal for stable machining
• for medium to high speed and feed
• Corner radius : 0.015″
• SF cheap-breaker for medium to finishing
• IC of Insert: 1/2″

• AlTiN PVD coated
• Suitable for stainless steel and supper alloys
• Ideal for medium to interrupted machining
• For medium speed and feed
• Corner radius : 0.015″
• FP cheap-breaker for medium to finishing
• IC of Insert: 1/2″