Includes Air tapping spindle, Air unit, Slanted and Parallel arms, Table mounting column,
Also comes and works with a set of 6 VERTEX “TORQUE CONTROL TAP COLLETS”
of tap size TC-312 (equal to system #1 with attaching shaft diameter of 0.748″).
Stand plate not included.

For tapping hole threads: #5~9/16″ (M3~M12).
Max speed: 400rpm,
Working radius range: 8″~55″ (200~1400mm).
Air pressure: 85 to 114 psi (6~8bar).

Includes Air tapping spindle, Air unit, Slanted and Parallel arms, Table mounting column,
Also comes and works with a set of 6 VERTEX “TORQUE CONTROL TAP COLLETS”
of tap size TC-820 (equal to system #2 with attaching shaft diameter of 1.220″).
Stand plate not included.

For tapping hole threads: 7/16″~3/4″ (M10~M20).
Tapping smaller holes is also possible with “TAPPING COLLET REDUCER/ADAPTER”.
Max speed: 200rpm,
Working radius range: 8″ to 55″ (200mm to 1400mm).
Air pressure: 85 to 114 psi (6~8bar).

With Electrical Servo Motor and Control Panel,
Speed, Torque, Depth and Pitch are
adjustable on Control Panel,
Tapping range from #5 to 1/2” (M2 to M12)
Horizontal working radius range up to 70.9” (1800mm),
Vertical working height range up to 43.3” (1100mm),
Power: 1.6hp (1.2kw),
Tapping speed range: 0-600 rpm, Adjustable on Control Panel,
Maximum torque: 22lbf.ft (30N.m),
Ability to perform both vertical and horizontal tapping directions,
Comes with a set of Torque Control Tap Holder,
Emergency braking system to protect tap which normally leads
up to 3 time saving on tap tool consumption,
Low noise working, lower than 50 decibels,
Easy to relocate comparing to pneumatic tapping machines,
Machine weight: 66lb (30kg)
Machine weight with packaging: 94.8lb (43kg)