Shopping cart

Side Lock End Mill Holders

Sort by

View
Shank: BT40 Nose: 1" Gage length: 3.94" Draw bar 5/8"-1 Balanced G2.5 @20,000 RPM
Shank: BT40 Nose: 1/2" Gage length: 2.48" Draw bar 5/8"-1 Balanced G2.5 @20,000 RPM
Shank: BT40 Nose: 1/4" Gage length: 2.48" Draw bar: M16 x 2.0 Balanced G2.5 @20,000 RPM
Shank: BT40 Nose: 3/16" Gage length: 2.48" Draw bar: M16 x 2.0 Balanced G2.5 @20,000 RPM
Shank: BT40 Nose: 3/4" Gage length: 2.48" Draw bar 5/8"-1 Balanced G2.5 @20,000 RPM
Shank: BT40 Nose: 3/8" Gage length: 2.48" Draw bar: M16 x 2.0 Balanced G2.5 @20,000 RPM
Shank: BT40 Nose: 5/16" Gage length: 2.48" Draw bar: M16 x 2.0 Balanced G2.5 @20,000 RPM
Shank: BT40 Nose: 5/8" Gage length: 2.48" Draw bar M16x2.0 Balanced G2.5 @20,000 RPM
Shank: BT40 Nose: 7/8" Gage length: 3.54" Draw bar 5/8"-1 Balanced G2.5 @20,000 RPM
Shank: CAT40 Nose:1- 1/2" Gage length: 4.7" Draw bar 5/8"-11
Shank: CAT40 Nose: 1-1/4" Gage length: 4.12" Draw bar 5/8"-11 Balanced G2.5 @20,000 RPM Taper to bore runout < 0.0002"
Shank: CAT40 Nose: 1" Gage length: 4" Draw bar 5/8"-11 Balanced G2.5 @20,000 RPM Taper to bore runout < 0.0002"
Shank: CAT40 Nose: 1/2" Gage length: 2.625" Draw bar : 5/8"-11 Balanced G2.5 @20,000 RPM Taper to bore runout <…
Shank: CAT40 Nose: 1/2" Gage length: 5" Draw bar : 5/8"-11 Balanced G2.5 @20,000 RPM Taper to bore runout <…
Shank: CAT40 Nose: 1/4" Gage length: 2.5" Draw bar 5/8"-11 Balanced G2.5 @20,000 RPM Taper to bore runout < 0.0002"
Shank: CAT40 Nose: 1/4" Gage length: 4" Draw bar 5/8"-11 Balanced G2.5 @20,000 RPM Taper to bore runout < 0.0002"