Shopping cart

Carbide End Mills

Sort by

View
Uncoated Carbide End Mill Diameter D : 1/16 Length of Cut L1 : 0.250" Shank Diameter S : 1/16 Overall…
Carbide End Mill Variable Helix Diameter D : 1/16 Length of Cut L1 : 0.250" Shank Diameter S : 1/16…
Suitable for Steel and Cast Iron Suitable for material up to 55HRC TiALN coating Helix-Angle : 35° Flute # :…
Uncoated Carbide End Mill Variable Helix Diameter D : 1/2 Length of Cut L1 : 1.25" Shank Diameter S :…
Uncoated Carbide End Mill with Long Reach Diameter D : 1/2 Length of Cut L1 : 2" Shank Diameter S…
Carbide End Mill Variable Helix Diameter D : 1/2 Length of Cut L1 : 1.250" Shank Diameter S : 1/2…
Carbide End Mill Variable Helix Diameter D : 1/2 Length of Cut L1 : 1.250" Shank Diameter S : 1/2…
Carbide End Mill Variable Helix Diameter D : 1/2 Length of Cut L1 : 1.25" Shank Diameter S : 1/2…
Carbide End Mill Variable Helix Diameter D : 1/2 Length of Cut Lc : 2" Shank Diameter S : 1/2…
To Cut: Aluminum Alloy, Plastic, Copper, Bronze Uncoated Helix-Angle : 45° 3 Flutes O.A.L : 3" Flute Length : 1-1/4"…
Uncoated Carbide End Mill Diameter D :  1/4 Length of Cut L1 : 0.750" Shank Diameter S : 1/4 Overall…
Uncoated Carbide End Mill with Long Reach Diameter D : 1/4 Length of Cut L1 : 1.125" Shank Diameter S…
Carbide End Mill Variable Helix Diameter D : 1/4 Length of Cut L1 : 0.750" Shank Diameter S : 1/4…
Carbide End Mill Variable Helix Diameter D : 1/4 Length of Cut L1 : 0.750" Shank Diameter S : 1/4…
Carbide End Mill Variable Helix Diameter D : 1/4 Length of Cut Lc : 1.125" Shank Diameter S : 1/4…
Uncoated Carbide End Mill Diameter D : 1/8 Length of Cut L1 : 0.500" Shank Diameter S : 1/8 Overall…

Shop Our Selection of Carbide End Mills for Long-Lasting Durability

They are applicable in variety of milling operations from face and shoulder milling to profiling and grooving type.

The first physical aspect of an end mill is cutting diameter which in some cases might be different than the shank diameter which is to be gripped in the tool holder. End mills come in standard length or long version. Less number of flutes provide more room between the flutes and more chip load capacity for roughing or cutting soft materials.

Carbide End Mills with more flutes are better choices for general and finishing purposes producing less chatter.The end mill tip surface defines if it is a center cutting or non-center cutting. End Mills with corner rad can be a good choice for machining non-sharp corners and rough machining applications since the sharp End Mills are more susceptible to chipping. Ball nose End mills are so beneficial whenever the cutting edges are not perpendicular to end mill axis.

Solid Carbide End Mill Coatings

Are a very important feature that should be considered when ordering an End Mill. They are made from Carbide which are very tough but brittle. The coatings cover the cutting edges and make them much harder and increase its temperature resistance significantly.