90° APKT/APMT1604 Face Mill Cutter Suitable for Facing, Shoulder Cutting, Slotting, Helical interpolation and Pocketing Diameter D : 2.0" Bore…
2.0″-90 INDEXABLE FACE MILL CUTTER
- 90° APKT/APMT1604 Face Mill Cutter
- Suitable for Facing, Shoulder Cutting, Slotting, Helical interpolation and Pocketing
- Diameter D : 2.0″
- Bore Diameter B : 0.750″
- Height H : 1.57″
- Seating Surface Diameter C : 1.575″
- Number of Pocket : 5
- Insert : APKT1604, APMT160
$154.00
23 in stock
90° APKT/APMT1604 Face Mill Cutter Suitable for Facing, Shoulder Cutting, Slotting, Helical interpolation and Pocketing Diameter D : 2.5″ Bore…
2.5″-90 INDEXABLE FACE MILL CUTTER
- 90° APKT/APMT1604 Face Mill Cutter
- Suitable for Facing, Shoulder Cutting, Slotting, Helical interpolation and Pocketing
- Diameter D : 2.5″
- Bore Diameter B : 0.750″
- Height H : 1.57″
- Seating Surface Diameter C : 1.89″
- Number of Pocket : 6
- Insert : APKT1604, APMT1604
$169.45
9 in stock
90° APKT/APMT1604 Face Mill Cutter Suitable for Facing, Shoulder Cutting, Slotting, Helical interpolation and Pocketing Diameter D : 3.0″ Bore…
3.0″-90 INDEXABLE FACE MILL CUTTER
- 90° APKT/APMT1604 Face Mill Cutter
- Suitable for Facing, Shoulder Cutting, Slotting, Helical interpolation and Pocketing
- Diameter D : 3.0″
- Bore Diameter B : 1.0″
- Height H : 1.97″
- Seating Surface Diameter C : 2.165″
- Number of Pocket : 7
- Insert : APKT1604, APMT160
$192.60
13 in stock
90° APKT/APMT1604 Face Mill Cutter Suitable for Facing, Shoulder Cutting, Slotting, Helical interpolation and Pocketing Diameter D : 4.0″ Bore…
4.0″-90 INDEXABLE FACE MILL CUTTER
- 90° APKT/APMT1604 Face Mill Cutter
- Suitable for Facing, Shoulder Cutting, Slotting, Helical interpolation and Pocketing
- Diameter D : 4.0″
- Bore Diameter B : 1.250″
- Height H : 2.48″
- Seating Surface Diameter C : 3.15″
- Number of Pocket : 8
- Insert : APKT1604, APMT1604
$219.10
9 in stock
Face Milling Cutter 1.97" Arbor Mounting 1" Including a wrench ZINC coated Insert APKT/APMT16 No. of Inserts: 4
AP90 FACE MILLING CUTTER FMC-50-I
Face Milling Cutter 1.97″
Arbor Mounting 1″
Including a wrench
ZINC coated
Insert APKT/APMT16
No. of Inserts: 4
$145.00
Out of stock
Face Milling Cutter 2.48"/63mm Arbor Mounting 1" Including a wrench ZINC coated Insert APKT/APMT16 No. of Inserts: 6
AP90 FACE MILLING CUTTER FMC-63-I
Face Milling Cutter 2.48″/63mm
Arbor Mounting 1″
Including a wrench
ZINC coated
Insert APKT/APMT16
No. of Inserts: 6
$165.00
Out of stock
Face Milling Cutter 3.15"/80mm Arbor Mounting 1" Including a wrench ZINC coated Insert APKT/APMT16 No. of Inserts 6
AP90 FACE MILLING CUTTER FMC-80-I
Face Milling Cutter 3.15″/80mm
Arbor Mounting 1″
Including a wrench
ZINC coated
Insert APKT/APMT16
No. of Inserts 6
$198.00
Out of stock
Shoulder milling Strong insert and low cutting force Helical cutting edge Good ship evacuation 2.000" cutter Arbor mounting, 0.750" coupling…
MILLING TOOL AP90 D2.00-A.75/1.75-05-16
- Shoulder milling
- Strong insert and low cutting force
- Helical cutting edge
- Good ship evacuation
- 2.000″ cutter
- Arbor mounting, 0.750″ coupling diameter, 1.750″ long
- 5 inserts of “APKT-1604…” or APHT-1604…” size 16mm
- Operation (refer to the attached photo)
- Main type of operation: Shouldering
- Other type of operation: Facing, Helical interpolation, slotting, ramp down.
$303.95
Out of stock
Shoulder milling Strong insert and low cutting force Helical cutting edge Good ship evacuation 3.000" cutter Arbor mounting, 1.000" coupling…
MILLING TOOL AP90 D3.00-A1.00/2.00-07-16
- Shoulder milling
- Strong insert and low cutting force
- Helical cutting edge
- Good ship evacuation
- 3.000″ cutter
- Arbor mounting, 1.000″ coupling diameter, 2.000″ long
- 7 inserts of “APHT 1604…” or “APKT 1604…” size 16mm
- Operation (refer to the attached photo)
- Main type of operation: Shouldering
- Other type of operation: Facing, Helical interpolation, slotting, ramp down
$382.88
2 in stock
Shoulder milling Strong insert and low cutting force Helical cutting edge Good ship evacuation Shoulder milling 1" cutter Arbor mounting,…
MILLING TOOL AP90 D4.00-A1.25/2.00-08-16
- Shoulder milling
- Strong insert and low cutting force
- Helical cutting edge
- Good ship evacuation
- Shoulder milling 1″ cutter
- Arbor mounting, 1″ coupling diameter, 4″ long
- 7 inserts of “APKT 1604…” , “APHT 1604…” size 16mm
- Operation (refer to the attached photo)
- Main type of operation: Shouldering
- Other type of operation: Facing, Helical interpolation, slotting, ramp down
$481.84
2 in stock