Shopping cart

  • Follow Us
0
All Categories
Side Lock End Mill Holders

Sort by

View
END MILL HOLDER BT40-E1″-3.94″

END MILL HOLDER BT40-E1″-3.94″

$78.00

END MILL HOLDER BT40-E1″-3.94″

$78.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER BT40-E1/2″-2.5″

END MILL HOLDER BT40-E1/2″-2.5″

$67.00

END MILL HOLDER BT40-E1/2″-2.5″

$67.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER BT40-E1/4″-2.48″

END MILL HOLDER BT40-E1/4″-2.48″

$67.00

END MILL HOLDER BT40-E1/4″-2.48″

$67.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER BT40-E3/16″-2.48″

END MILL HOLDER BT40-E3/16″-2.48″

$67.00

END MILL HOLDER BT40-E3/16″-2.48″

$67.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER BT40-E3/4″-2.48″

END MILL HOLDER BT40-E3/4″-2.48″

$69.00

END MILL HOLDER BT40-E3/4″-2.48″

$69.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER BT40-E3/8″-2.48″

END MILL HOLDER BT40-E3/8″-2.48″

$67.00

END MILL HOLDER BT40-E3/8″-2.48″

$67.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER BT40-E5/16″-2.48″

END MILL HOLDER BT40-E5/16″-2.48″

$67.00

END MILL HOLDER BT40-E5/16″-2.48″

$67.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER BT40-E5/8″-2.48″

END MILL HOLDER BT40-E5/8″-2.48″

$69.00

END MILL HOLDER BT40-E5/8″-2.48″

$69.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER BT40-E7/8″-3.54″

END MILL HOLDER BT40-E7/8″-3.54″

$76.00

END MILL HOLDER BT40-E7/8″-3.54″

$76.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER CAT40-1-1/2″-4.7″

END MILL HOLDER CAT40-1-1/2″-4.7″

$127.84

END MILL HOLDER CAT40-1-1/2″-4.7″

$127.84
Shank : CAT40 Nose :1- 1/2" Gage length : 4.7" Draw bar 5/8"-11
END MILL HOLDER CAT40-E1-1/4″-4.12″

END MILL HOLDER CAT40-E1-1/4″-4.12″

$89.00

END MILL HOLDER CAT40-E1-1/4″-4.12″

$89.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER CAT40-E1″-4″

END MILL HOLDER CAT40-E1″-4″

$73.00

END MILL HOLDER CAT40-E1″-4″

$73.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER CAT40-E1/2″-2.5″

END MILL HOLDER CAT40-E1/2″-2.5″

$69.00

END MILL HOLDER CAT40-E1/2″-2.5″

$69.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER CAT40-E1/2″-4″

END MILL HOLDER CAT40-E1/2″-4″

$87.00

END MILL HOLDER CAT40-E1/2″-4″

$87.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER CAT40-E1/4″-2.5″

END MILL HOLDER CAT40-E1/4″-2.5″

$64.00

END MILL HOLDER CAT40-E1/4″-2.5″

$64.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER CAT40-E1/4″-4″

END MILL HOLDER CAT40-E1/4″-4″

$78.00

END MILL HOLDER CAT40-E1/4″-4″

$78.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…