END MILL HOLDER BT40-E3/4″-2.48″
- Made of Special Alloy Steel
- Surface hardened to 62 HRC
- All critical surfaces are ground.
- Dynamically balanced to G2.5 at 20,000RPM
- Taper to bore runout <0.0002″
- D1 : 3/4
- D2 : 1.75″
- Gauge length L : 3.94″
- Pull Stud thread : M16 x 2.0
- Coolant thru capability
- Compatible Pull Studs: 3015-0250, 3015-0270, 3015-0120, 3015-0030, 3015-0040, 3015-0078, 3015-0290, 3015-1110
$69.00
3 in stock