Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER CAT50-E3/4″-3 3/4″
- Made of Special Alloy Steel
- Surface hardened to 62 HRC
- All critical surfaces are ground.
- Dynamically balanced to G2.5 at 20,000RPM
- Taper to bore runout <0.0002″
- D1 : 3/4
- D2 : 1.75″
- Gauge length L : 3.75″
- Pull Stud thread : 1″-8
- Coolant thru capability
$106.00
2 in stock
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER CAT50-E3/8″-2.5″
- Made of Special Alloy Steel
- Surface hardened to 62 HRC
- All critical surfaces are ground.
- Dynamically balanced to G2.5 at 20,000RPM
- Taper to bore runout <0.0002″
- D1 : 3/8
- D2 : 1.40″
- Gauge length L : 2.5″
- Pull Stud thread : 1″-8
- Coolant thru capability
$106.00
4 in stock
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER CAT50-E5/8″-3 3/4″
- Made of Special Alloy Steel
- Surface hardened to 62 HRC
- All critical surfaces are ground.
- Dynamically balanced to G2.5 at 20,000RPM
- Taper to bore runout <0.0002″
- D1 : 5/8
- D2 : 1.60″
- Gauge length L : 3.75″
- Pull Stud thread : 1″-8
- Coolant thru capability
$106.00
3 in stock
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER CAT50-E7/8″-3 3/4″
- Made of Special Alloy Steel
- Surface hardened to 62 HRC
- All critical surfaces are ground.
- Dynamically balanced to G2.5 at 20,000RPM
- Taper to bore runout <0.0002″
- D1 : 7/8
- D2 : 2.05″
- Gauge length L : 3.75″
- Pull Stud thread : 1″-8
- Coolant thru capability
$106.00
5 in stock
Diameter Size : 1/4 Collapsibility : 0.020" Tool holding range : 0.250″ to 0.230″ Made of high alloy spring steel…
ER11 Collet 1/4″
- Diameter Size : 1/4
- Collapsibility : 0.020″
- Tool holding range : 0.250″ to 0.230″
- Made of high alloy spring steel
- Hardened surface to 44-48 HRC
- Maximum gripping force
- Runout precision : 0.0004″ (Concentricity of .0002″)
$15.00
11 in stock
ER11, Hole Size 6 mm Range 6.0 to 5.5 mm Made of high alloy spring steel Hardened surface to 44-48…
ER11 COLLET, 6mm HOLE
- ER11, Hole Size 6 mm
- Range 6.0 to 5.5 mm
- Made of high alloy spring steel
- Hardened surface to 44-48 HRc
- Maximum gripping force with 16 jaws
- Runout precision of 10µm (Concentricity of 5µm )
$15.00
19 in stock
Diameter: 19mm (0.75") Hex width: 17mm (0.67") length: 11.3mm (0.44") Thread: M14x0.75mm Order related Spanner : 3006-0060
ER11 HEX COLLET NUT
- Diameter: 19mm (0.75″)
- Hex width: 17mm (0.67″)
- length: 11.3mm (0.44″)
- Thread: M14x0.75mm
- Order related Spanner : 3006-0060
$13.00
56 in stock
Diameter: 16mm (0.63") Thread: M13x0.75mm Length: 12mm (0.47") Order related Spanner : 3006-0020
ER11 MINI COLLET NUT
- Diameter: 16mm (0.63″)
- Thread: M13x0.75mm
- Length: 12mm (0.47″)
- Order related Spanner : 3006-0020
$14.00
48 in stock
Diameter Size : 3/8 Collapsibility : 0.040" Tool holding range : 0.375" to 0.336" Made of high alloy spring steel…
ER16 Collet 3/8″
- Diameter Size : 3/8
- Collapsibility : 0.040″
- Tool holding range : 0.375″ to 0.336″
- Made of high alloy spring steel
- Hardened surface to 44-48 HRC
- Maximum gripping force
- Runout precision : 0.0004″ (Concentricity of .0002″)
$12.00
72 in stock
Diameter: 28mm (1.1") Hex width: 25mm (1"") Length: 17.5mm (0.7") Thread: M22x1.5mm Order related Spanner : 3006-0070
ER16 HEX COLLET NUT
- Diameter: 28mm (1.1″)
- Hex width: 25mm (1″”)
- Length: 17.5mm (0.7″)
- Thread: M22x1.5mm
- Order related Spanner : 3006-0070
$14.00
47 in stock
Diameter: 22mm (0.87") Thread: M19x1mm Length: 18mm (0.71) Order related Spanner : 3006-0030
ER16 MINI COLLET NUT
Diameter: 22mm (0.87″)
Thread: M19x1mm
Length: 18mm (0.71)
Order related Spanner : 3006-0030
$14.00
16 in stock
Sizes included : 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2 Made of high…
ER20 COLLET SET imperial, 14 pieces
- Sizes included : 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2
- Made of high alloy spring steel
- Hardened surface to 44-48 HRC
- Collapsibility : 0.040″
- Maximum gripping force
- Runout precision of 0.0004″ (Concentricity of .0002″)
$164.00
5 in stock
Diameter: 34mm (1.34") Hex width: 30mm (1.18") Length: 19mm (0.75") Thread: M25x1.5mm Order related Spanner : 3006-0080
ER20 HEX COLLET NUT
- Diameter: 34mm (1.34″)
- Hex width: 30mm (1.18″)
- Length: 19mm (0.75″)
- Thread: M25x1.5mm
- Order related Spanner : 3006-0080
$14.00
35 in stock
Diameter: 25mm (1") Thread: M24x1mm Length: 19mm (0.75) Order related Spanner : 3006-0040
ER20 MINI COLLET NUT
- Diameter: 25mm (1″)
- Thread: M24x1mm
- Length: 19mm (0.75)
- Order related Spanner : 3006-0040
$14.00
42 in stock
Diameter Size : 1/2 Collapsibility : 0.040″ Tool holding range : 0.500″ to 0.461″ Made of high alloy spring steel…
ER25 COLLET 1/2
- Diameter Size : 1/2
- Collapsibility : 0.040″
- Tool holding range : 0.500″ to 0.461″
- Made of high alloy spring steel
- Hardened surface to 44-48 HRC
- Maximum gripping force
- Runout precision : 0.0004″ (Concentricity of .0002″)
$13.50
12 in stock
Diameter: 42mm (1.65") Length: 20mm (0.8") Thread: M32x1.5mm related Spanner order : 3006-0090
ER25 COLLET NUT
- Diameter: 42mm (1.65″)
- Length: 20mm (0.8″)
- Thread: M32x1.5mm
- related Spanner order : 3006-0090
$16.00
55 in stock
