COLLET HOLDER BT30-ER16-2.76″
- Made of Special Alloy Steel
- Surface hardened to 62 HRC
- All critical surfaces are ground
- Dynamically balanced to G2.5 at 20,000RPM
- Each holder comes with a clamping Nut
- Taper to Taper runout <0.0002″
- Gauge length L1 : 2.76″
- Nut outer diameter D : 1.10″
- Pull Stud thread : M12 x 1.75
- Coolant thru capability
- ER16 capacity : 1/16-3/8 (1-10mm)
- Wrench and pull stud are not included
$62.00
41 in stock
