• Diameter: 12″
• Plate side holding force : 46lbf
• Plate Center holding force: 66lb
• New type of thin chuck, in 2″ thickness,
  for grinding and electro-discharging works,
  for thin plate or small works, in wide range
  of applications, it features a wide effective
  magnetic area on the face plate (chucking
  face).

Diameter: 6″
Plate side holding force:46lbf
Plate Center holding force: 66lbf

New type of thin chuck, in 2″ thickness,
for grinding and electro-discharging works,
for thin plate or small works, in wide range
of applications, it features a wide effective
magnetic area on the face plate (chucking
face).

Input: AC 220/380/415/440V
Output: DC 0~120V, 15A

1. Suitable for standard type of electric magnetic chucks.
2. With current capacity of 10A and 15A; demagnetizing time is 6-15 seconds.
3. Precisely adjust the magnetic force of electric magnetic chucks and indicate
LED voltage and current.
4. Suitable for any kind of electric magnetic chucks

Input: AC 220/380/415/440V
Output: DC 0~120V, 20A

1. Suitable for super powerful type of big electric magnetic chucks and could
control 2 chucks at the same time.
2. With current capacity of 20A; demagnetizing time is 8-15 seconds.
3. Precisely adjust the magnetic force of electric magnetic chucks and indicate
LED voltage.
4. Suitable for any kind of electric magnetic chucks
5. Built-in fan for radiation heat.

APPLICATION
New type of think chuck, in 50mm thickness, for grinding and electro discharging works, for thin plates or small works, in wide range of applications, it features a wide effective magnetic area on the chucking face.

FEATURES
● Thin and light to meet various applications.
● Fine-pitched magnetic poles, on this model, make it ideally suitable for small
and thin works.
● Hexagonal wench key is used for the magnetic ON/OFF changeover handle it
is inserted through the side easily removed and operates quite lightly.
● The chuck surface has a wider effective magnetic area than other chucks of
similar type.

APPLICATION
New type of think chuck, in 50mm thickness, for grinding and electrodischarging works, for thin plate or small works, in wide range of applications, it features a wide effective magnetic area on the chucking face.

FEATURES
● Thin and light to meet versatle applications.
● Fine-pitched magnetic poles, on this model, make it ideally suitable for small
and thin works.
● Hexagonal wench key is used for the magnetic ON/OFF changeover handle it
is inserted through the side easi-ly removed and operates quite lightly.
● The chuck surface has a wider effective mgnetic area than other chucks of
similar type.

APPLICATION
New type of think chuck, in 50mm thickness, for grinding and electrodischarging works, for thin plate or small works, in wide range of applications, it features a wide effective magnetic area on the chucking face.

FEATURES
● Thin and light to meet versatle applications.
● Fine-pitched magnetic poles, on this model, make it ideally suitable for small
and thin works.
● Hexagonal wench key is used for the magnetic ON/OFF changeover handle it
is inserted through the side easi-ly removed and operates quite lightly.
● The chuck surface has a wider effective mgnetic area than other chucks of
similar type.

APPLICATION
New type of think chuck, in 50mm thickness, for grinding and electrodischarging works, for thin plate or small works, in wide range of applications, it features a wide effective magnetic area on the chucking face.

FEATURES
● Thin and light to meet versatle applications.
● Fine-pitched magnetic poles, on this model, make it ideally suitable for small
and thin works.
● Hexagonal wench key is used for the magnetic ON/OFF changeover handle it
is inserted through the side easi-ly removed and operates quite lightly.
● The chuck surface has a wider effective mgnetic area than other chucks of
similar type.