Suitable for 6" Power Lathe Chuck Interchangeable with B-206 Kitagawa Chucks Serration Pitch x Angle : 1.5mm x 60° Made…
6″ Soft Jaws 120° Pointed MTSPJ-6-2
- Suitable for 6″ Power Lathe Chuck
- Interchangeable with B-206 Kitagawa Chucks
- Serration Pitch x Angle : 1.5mm x 60°
- Made of Soft Steel 5-12 HRC
- Length J1 : 73mm
- Height J3 : 36mm
- Width J2 : 31mm
- Groove width J4 : 12mm
- J5 : 10mm
- J6 : 20mm
- B : 6mm
- Fastener Size : M10
- Sets includes : 3pcs
- Interchangeable with Kitagawa, Howa, Victor
$61.74
10 in stock
Suitable for 6" Power Lathe Chuck Interchangeable with B-206 Kitagawa Chucks Serration Pitch x Angle : 1.5mm x 60° Made…
6″ Soft Jaws 60° Pointed MTSPJ-6
- Suitable for 6″ Power Lathe Chuck
- Interchangeable with B-206 Kitagawa Chucks
- Serration Pitch x Angle : 1.5mm x 60°
- Made of Soft Steel 5-12 HRC
- Length J1 : 73mm
- Height J3 : 36mm
- Width J2 : 31mm
- Groove width J4 : 12mm
- J5 : 10mm
- J6 : 20mm
- B : 6mm
- Fastener Size : M10
- Sets includes : 3pcs
- Interchangeable with Kitagawa, Howa, Victor
$61.74
2 in stock
6" Soft Jaws for Scroll Chuck Material : Steel Match with Kitagawa SBS series, Howa, Victor Chucks Overall Length C1…
6″ Soft Jaws for Scroll Chuck VSJ-6
- 6″ Soft Jaws for Scroll Chuck
- Material : Steel
- Match with Kitagawa SBS series, Howa, Victor Chucks
- Overall Length C1 : 75mm
- Width C2 : 26mm
- Height C3 : 38mm
- Bore Center to Center C4 : 38.1mm
- Side to Bore Center C5 : 18mm
- Bore Diameter C6 : 14mm
- Bore Height C8 : 27mm
- Screw Size C9 : M8
- Tongue Width C10 : 12.68mm
- Groove Width C11 : 7.94mm
- Tongue Height C12 : 3mm
- Groove Height C13 : 3.5mm
- Brand : VERTEX Taiwan
$92.90
3 in stock
Suitable for Power Lathe Chuck 6″ Interchangeable with B-206 Kitagawa Chucks Serration Pitch x Angle : 1.5mm x 60° Made…
6″ Soft Jaws MTSSJ-6
- Suitable for Power Lathe Chuck 6″
- Interchangeable with B-206 Kitagawa Chucks
- Serration Pitch x Angle : 1.5mm x 60°
- Made of Soft Steel 5-12 HRC
- Length J1 : 73mm
- Height J3 : 36mm
- Width J2 : 31mm
- Groove width J4 : 12mm
- J5 : 15mm
- J6 : 20mm
- B : 14mm
- Fastener Size : M10
- Sets includes : 3pcs
- Interchangeable with Kitagawa, Howa, Victor
$38.49
15 in stock
Suitable for Power Lathe Chuck 6″ Interchangeable with B-206 Kitagawa Chucks Serration Pitch x Angle : 1.5mm x 60° Made…
6″ Soft Jaws MTSSJ-6-60
- Suitable for Power Lathe Chuck 6″
- Interchangeable with B-206 Kitagawa Chucks
- Serration Pitch x Angle : 1.5mm x 60°
- Made of Soft Steel 5-12 HRC
- Length J1 : 73mm
- Height J3: 60mm
- Width J2 : 31mm
- Groove width J4 : 12mm
- J5 : 15mm
- J6 : 20mm
- B : 14mm
- Fastener Size : M10
- Sets includes : 3pcs
- Interchangeable with Kitagawa, Howa, Victor
$66.33
3 in stock
Precision Modular Double Station Vise Jaw Width : 6" Jaw Opening : 2 x 4.33" Jaw Height : 1.97" Bed…
6″ x 4.3″ Double Opening Modular Vise
- Precision Modular Double Station Vise
- Jaw Width : 6″
- Jaw Opening : 2 x 4.33″
- Jaw Height : 1.97″
- Bed Height : 2″
- Overall Length : 25.5″
- Accuracy : 0.0002″
- Overall Opening if the middle Jaw is removed : 12″
$1,942.67
2 in stock
Accuracy ± 0.001 Hardened Stainless steel Shockproof design With upper set screw Flat depth rod Four way measurement Backside with…
6” Dial Caliper
- Accuracy ± 0.001
- Hardened Stainless steel
- Shockproof design
- With upper set screw
- Flat depth rod
- Four way measurement
- Backside with thread table
- Packed in plastic box
- Delivered with inspection report
$64.19
24 in stock
Made by KARNASCH/Germany Ø16mm Head, Ø10mm Shank Suitable for: Steel<130Ksi, Stailess Steel<130Ksi, Grey Cast Iron, Aluminum>10% Si, Copper, Brass, Tin,…
60 degree COUNTERSINK, Ø12.5mm HSS-XE DIN334
- Made by KARNASCH/Germany
- Ø16mm Head, Ø10mm Shank
- Suitable for: Steel<130Ksi, Stailess Steel<130Ksi, Grey Cast Iron, Aluminum>10% Si, Copper, Brass, Tin, Plastic GRP/CRP
- The flutes of Karnasch High-Performance countersinkers are always CBN ground.
- This guarantees: Excellent chip clearance / chatter-free working / scratch-free surface / best centering.
- HSS-XE steel: Made of high-alloyed special steel „XE“ for considerably longer service life than HSS-Steel.
$39.52
5 in stock
Carbide Biconical 90 Chamfering Tool Head Dia : 6mm Neck Length : 25mm Neck Dia : 3mm Shank Diameter :…
6mm 90° Carbide Biconical Chamfering Cutter
- Carbide Biconical 90 Chamfering Tool
- Head Dia : 6mm
- Neck Length : 25mm
- Neck Dia : 3mm
- Shank Diameter : 6mm
- Overall Length : 50mm
$43.37
3 in stock
Uncoated Carbide End Mill Diameter D : 6mm Length of Cut L1 : 15mm Shank Diameter S : 6mm Overall…
6mm Carbide End Mill 3FL Alu.
- Uncoated Carbide End Mill
- Diameter D : 6mm
- Length of Cut L1 : 15mm
- Shank Diameter S : 6mm
- Overall Length L : 50mm
- Efficient Cheap Evacuation
- Improved Surface Finish
- Reduced Cutting Forces
- Ideal to cut : Aluminum, Copper, Brass, Plastic
$17.21
Out of stock
Made of high Alloy Spring Steel Surface hardened to 44-48 HRC Maximum gripping force Runout accuracy : 0.0004″ Size :…
6mm ER16 Sealed Collet
- Made of high Alloy Spring Steel
- Surface hardened to 44-48 HRC
- Maximum gripping force
- Runout accuracy : 0.0004″
- Size : 6mm
- Overall Diameter : 17mm
- Overall Length : 27mm
$23.80
9 in stock
Made from high-quality spring steel for durability and long service life Designed to allow coolant to flow through, enhancing cooling…
6mm ER20 Sealed Coolant Collet
- Made from high-quality spring steel for durability and long service life
- Designed to allow coolant to flow through, enhancing cooling and lubrication during machining
- Made from high-quality spring steel for durability and long service life
- Hardened to 44-48 HRC
- Runout tolerance : 0.0004″
- Size : 6mm
- Overall Length : 31mm
- Overall Diameter : 21mm
$23.80
10 in stock
Made from high-quality spring steel for durability and long service life Designed to allow coolant to flow through, enhancing cooling…
6mm ER25 Sealed Coolant Collet
- Made from high-quality spring steel for durability and long service life
- Designed to allow coolant to flow through, enhancing cooling and lubrication during machining
- Made from high-quality spring steel for durability and long service life
- Hardened to 44-48 HRC
- Runout tolerance : 0.0004″
- Size : 6mm
- Overall Length : 35mm
- Overall Diameter : 26mm
$28.00
10 in stock
Carbide End Mill Variable Helix Diameter D : 6mm Length of Cut L1 : 15mm Shank Diameter S : 6mm…
6mm Vari-Helix 4FL Carbide End Mill
- Carbide End Mill Variable Helix
- Diameter D : 6mm
- Length of Cut L1 : 15mm
- Shank Diameter S : 6mm
- Overall Length L : 50mm
- Efficient Cheap Evacuation
- Improved Surface Finish
- Reduced Cutting Forces
$16.50
Out of stock
With ratchet friction Thimble Graduation : 0.0001" Accuracy : ± 0.00015" Carbide measuring face Frame painted, scale chrome finished Including…
7-8″ Outside Micrometer
- With ratchet friction Thimble
- Graduation : 0.0001″
- Accuracy : ± 0.00015″
- Carbide measuring face
- Frame painted, scale chrome finished
- Including Setting Gauge
- With adjusting key
- Supplied with Inspection Certificate
- Delivered in plastic box
$116.89
Out of stock
Uncoated Carbide End Mill Diameter D : 7/16 Length of Cut L1 : 1" Shank Diameter S : 7/16 Overall…
7/16 Carbide End Mill 3FL Alu.
- Uncoated Carbide End Mill
- Diameter D : 7/16
- Length of Cut L1 : 1″
- Shank Diameter S : 7/16
- Overall Length L : 3″
- Efficient Cheap Evacuation
- Improved Surface Finish
- Reduced Cutting Forces
- Ideal to cut : Aluminum, Copper, Brass, Plastic
$48.50
10 in stock
