Shopping cart

  • Follow Us
0
All Categories
Shop

Sort by

View
END MILL HOLDER CAT40-E1/4″-2.5″

END MILL HOLDER CAT40-E1/4″-2.5″

$64.00

END MILL HOLDER CAT40-E1/4″-2.5″

$64.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER CAT40-E1/4″-4″

END MILL HOLDER CAT40-E1/4″-4″

$78.00

END MILL HOLDER CAT40-E1/4″-4″

$78.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER CAT40-E10-2.62″(10mm)

END MILL HOLDER CAT40-E10-2.62″(10mm)

$127.58

END MILL HOLDER CAT40-E10-2.62″(10mm)

$127.58
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Taper to bore runout <0.0002″…
END MILL HOLDER CAT40-E12-2.62″(12mm)

END MILL HOLDER CAT40-E12-2.62″(12mm)

$148.00

END MILL HOLDER CAT40-E12-2.62″(12mm)

$148.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Taper to bore runout <0.0002″…
END MILL HOLDER CAT40-E14-2.62″(14mm)

END MILL HOLDER CAT40-E14-2.62″(14mm)

$148.00

END MILL HOLDER CAT40-E14-2.62″(14mm)

$148.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Taper to bore runout <0.0002″…
END MILL HOLDER CAT40-E16-2.75″(16mm)

END MILL HOLDER CAT40-E16-2.75″(16mm)

$154.10

END MILL HOLDER CAT40-E16-2.75″(16mm)

$154.10
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Taper to bore runout <0.0002″…
END MILL HOLDER CAT40-E20-3.5″(20mm)

END MILL HOLDER CAT40-E20-3.5″(20mm)

$167.00

END MILL HOLDER CAT40-E20-3.5″(20mm)

$167.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Taper to bore runout <0.0002″…
END MILL HOLDER CAT40-E3/16″-2.5″

END MILL HOLDER CAT40-E3/16″-2.5″

$64.00

END MILL HOLDER CAT40-E3/16″-2.5″

$64.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER CAT40-E3/16″-4″

END MILL HOLDER CAT40-E3/16″-4″

$74.00

END MILL HOLDER CAT40-E3/16″-4″

$74.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER CAT40-E3/4″-2.5″

END MILL HOLDER CAT40-E3/4″-2.5″

$69.00

END MILL HOLDER CAT40-E3/4″-2.5″

$69.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER CAT40-E3/4″-5″

END MILL HOLDER CAT40-E3/4″-5″

$84.00

END MILL HOLDER CAT40-E3/4″-5″

$84.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER CAT40-E3/8″-2.5″

END MILL HOLDER CAT40-E3/8″-2.5″

$64.00

END MILL HOLDER CAT40-E3/8″-2.5″

$64.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER CAT40-E3/8″-5″

END MILL HOLDER CAT40-E3/8″-5″

$84.00

END MILL HOLDER CAT40-E3/8″-5″

$84.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER CAT40-E5/16″-2.5″

END MILL HOLDER CAT40-E5/16″-2.5″

$64.00

END MILL HOLDER CAT40-E5/16″-2.5″

$64.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER CAT40-E5/16″-4″

END MILL HOLDER CAT40-E5/16″-4″

$78.00

END MILL HOLDER CAT40-E5/16″-4″

$78.00
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Dynamically balanced to G2.5 at…
END MILL HOLDER CAT40-E5/8-4″

END MILL HOLDER CAT40-E5/8-4″

$82.00

END MILL HOLDER CAT40-E5/8-4″

$82.00
This END MILL HOLDER CAT40-E5/8-4" has: Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground.…